HLL-1500 series flexible energy storage system (HLL3354 - 1500)
Independently control the charge and discharge status of each battery module (approximately 20 cells in series), avoiding overcharge or over-discharge abuse at the source.
Category:
Centralized flexible energy storage system
Keyword:
Energy storage
这里是占位文字
这里是占位文字
这里是占位文字
这里是占位文字
这里是占位文字
Tel:+86 0592-3752608
Email:wangwei@heespower.com
- Product Description
-
Product Features
High Safety
► Independently controls the charge and discharge status of each battery module (approximately 20 cells in series), preventing battery overcharge or over-discharge abuse from the source.
► Timely online isolation of sub-healthy battery modules.
► Topology-level intrinsic safety design, intrinsic shutdown of the PACK-level circuit in the non-operating state, three-level control system architecture, complete protection for voltage, temperature, current, and insulation;
► 100μs battery overcurrent protection lock, removal of battery modules with safety hazards or entire cluster lock, multi-level fuse configuration, protection against serious faults;
► Perfluorohexanone fire suppression, three-level early warning and fire suppression design.
High Reliability
► Failure of any single battery module does not cause the battery cluster to shut down.
► Failure of any single battery module does not cause the battery stack to shut down.
► Failure of any single component does not cause the entire energy storage system to shut down.
Multi-functional
► Peak shaving and valley filling, demand management, response scheduling, peak regulation and frequency regulation, backup power, black start
High Efficiency
► No parallel circulating current
► Low cable usage
► AC-side efficiency ≥88% (including auxiliary losses)
► Liquid cooling
Low Attenuation
► No series capacity loss
► No battery cluster parallel circulating current
Convenient Delivery
► Battery stack, full current control system, fire suppression, and air conditioning are all integrated within a single container.
► Integrated delivery, only DC bus interface and communication interface to the outside.
Convenient Maintenance
► Routine inspection once every 12 months.
► Replacement of faulty battery modules and power conversion units is plug-and-play.
Performance Specifications
Typical configuration of HLL-1500 series flexible energy storage system
Product model
HLL3354-1500
Rated battery capacity
3.354MWh
Rated AC charging/discharging power
1.725MW
Number of battery containers
1*3354kWh
Booster all-in-one machine
1
Communication control cabinet
1
Battery container HLL3354-1500 parameters
Rated power
3354kWh
Depth of discharge
≥95%
Battery capacity
280Ah
Mounting location
outdoors
Number of cells
3744
Protection level
IP55
Number of battery modules
72
Operating temperature range
-25°C-+45°C (>45°C derating)
The connection method of the battery cells in the battery module
IP52S, one full-current controller is connected in parallel for each half of the module
Operating humidity range
0%-95% (non-condensing)
Battery module connection method
Flexible series connection by full current controller
Highest altitude
4000m (>4000m delimitation)
Balanced current between battery modules
140A full current equalization
Communication interface
Fiber/CAN/RS485
DC voltage range
1165V-1498V
Cooling method
Liquid cooling
Charge-discharge rate
≤0.5C
Dimensions (W×D×H)
≤6058×2700×2896mm
weight
35000kg
Typical parameters of booster all-in-one machine (outsourced)
Power rating
1.725MW
DC voltage range
1000-1500V
Rated grid voltage
10-35kVac
Rated grid voltage
690V
System maximum efficiency
98%
Rated grid frequency
50Hz
Protection level
IP54
Maximum efficiency
99.00%
Operating temperature range
-40-60℃
Protection level
IP66
Allowable humidity range
0-100% (no condensation)
Power factor
>0.99 (> 20% load)
Working altitude
4000m (>4000m delimitation)
Isolation method
Transformer isolation
Related Recommendations
Centralized flexible energy storage system HLL Grid-Following Converter
Creatively propose a brand-new energy storage system circuit topology and control architecture to achieve intrinsic safety at the electrical topology level.
Centralized flexible energy storage system HLL-GFM Grid-Forming Converter
Creatively propose a brand-new energy storage system circuit topology and control architecture to achieve intrinsic safety at the electrical topology level.
HLLD Series Direct-connection Flexible Energy Storage System
Creatively propose a brand-new energy storage system circuit topology and control architecture to achieve intrinsic safety at the electrical topology level.
Leave a message
Provides you with a complete solution, get ready for your choice
If you are interested in our products, please leave your email address, and we will contact you as soon as possible, thank you!